Lodde Flux Pen Yosker 951

Beskrivelse

NO-CLEAN Flux-Pen til solcellepanel, Flux skal lette flowet af loddemetal ved at reducere overfladespændingen af ​​ophavsmetal og forhindre genoxidering ved at blokere luften efter omgående fjernelse af oxidfilm fra ophavsmetal og dækning af overfladen. Ideel brugt til solcellepanel, forbedrer lodde ydelsen

Sådan bruges:

Tryk til for at starte fluxflow

Behold hætten på, når den ikke er i brug

Bemærk venligst:

I: Hvis du rører ved huden, skal du vaske den grundigt, så det ikke forårsager hudirritation

II: Opbevares utilgængeligt for børn

Specifikation:

Nettoindhold: 10ml

Størrelse: 142 x 19 x 15 mm

Vægt: 20 g

Pakket inkluderer

1 stk Lodde Flux Pen

 

Data Blad:

 

951 No-Clean Flux Pen – Data Sheet

1. Product Overview
The 951 is a high-performance, halogen-free, and rosin-free organic flux pen. It is specifically designed for the rework of both traditional through-hole and surface mount (SMT) circuit board components.

2. Key Features
* Minimal Residue: Very low solid content (2.0%) ensures little to no residue after welding, which does not interfere with electrical testing.
* Enhanced Performance: Increases welding speed and firmness while minimizing welding bridges (short circuits) and cold solder joints.
* Corrosion Resistance: Contains an inhibitor that prevents the formation of corrosion products even when moisture is present on bare copper surfaces.
* High Reliability: Features higher surface insulation resistance compared to typical organic water-soluble fluxes.
* Broad Application: Suitable for automotive, computer, telecommunications, and other high-reliability electronics.

3. Physical & Technical Specifications
| Model | 951 |
| Flux Type | No-Clean / Halogen-Free / Rosin-Free |
| Solid Content | 2.0% |
| Liquid Content | 10ml |
| Weight | 18g |
| Pen Body Length | 140mm |
| Pen Body Diameter | 15mm |
| Pen Head Diameter | ~4.3mm to 4.5mm |
| Exposed Tip Length | ~5mm to 8mm |
| Shelf Life / Validity | 2 Years |

4. Operational Instructions
* Application: The pen features a round fiber head. To use, press the pen head against the welding plate; the flux flow is controlled by the strength of the press and the speed of movement.
* Adjustability: Flux volume can be adjusted according to the size of the specific solder joints.
* Storage: Always cover the cap tightly after use to prevent the evaporation of effective volatile substances.

5. Safety Precautions
* Skin Contact: If the flux contacts skin, wash immediately with clean water to avoid irritation.
* Environment: Store in a cool, dry place within the 2-year validity period.